Is the Electro-Voice RE20 worth it for podcasting and broadcast voice?
The RE20 earns its $449 if you talk for hours and move around the mic. Variable-D, RE20 vs SM7B in numbers, the gain your interface needs, and when the RE320 is the smarter buy.
A morning host reads a traffic report, then turns his head forty degrees to check the producer's screen and keeps talking. On most microphones that turn costs something you can hear: the voice goes thinner, a little quieter, and the bass that was there a second ago drains away. When the Electro-Voice RE20 came out in 1968, radio and TV announcers adopted it largely because that turn costs very little. The mic was built so the tone stays put while the person in front of it moves.
That is the whole case for the RE20, and it is also the whole question. If you sit still, talk at a steady distance and already have a decent interface, a $449 microphone that specializes in forgiving movement may solve a problem you do not have. If you rock in your chair, lean in for a punchline and lean back to read your notes, it may be the most useful thing on your desk.
The short answer
The Electro-Voice RE20 is worth it if three things are true: you record or broadcast your voice for hours, you move around the mic while you talk, and you are ready to feed it about 57 to 60 dB of clean gain. It is not worth it for video calls alone, for a laptop with no audio interface, or for a quiet speaker on a budget interface who will end up turning everything to maximum.
As of October 2026 the RE20 sells for $449.00 at Sweetwater in the US, in both the classic beige and the RE20 Black version, and it is still a current product on Electro-Voice's site. The optional 309A shock mount costs another $139.00.
If you have not yet decided whether a dynamic mic suits your room at all, start with Is a dynamic mic really better for podcasting in a normal room? first. This page assumes you already want a dynamic and are shopping in the $400 range.
What Variable-D actually does
Every cardioid mic picks up sound from the front and cancels sound from behind by letting some of it reach the back of the diaphragm. In a typical single-port design that rear path also produces the proximity effect: get within a few inches and the low end swells. Some people love it, because leaning in gives them a free "radio voice". The catch is that your bass now depends on where your head is, second by second.
Electro-Voice developed Variable-D in 1953 to deal with exactly this. Instead of one rear opening, the housing routes sound to the back of the element through several ports along the body. The RE20, introduced in 1968, applies that design to a large dynamic capsule. Electro-Voice's product page describes the result as low end that holds "steady on and off axis", with no bass bump when you move in and no thin edge when you back away. Treat the "no" as the maker's wording. What the design aims for is a proximity effect small enough that distance stops being the main thing shaping your tone.
Three other parts of the design matter for a voice at a desk:
- Internal blast filter. The RE20 has a built-in pop and wind filter. Electro-Voice says it tames hard consonants "without an add-on screen", so the mic is meant to be used bare.
- Hum-bucking coil and steel case. Electro-Voice says they reject magnetically induced hum, the kind a power supply or transformer sitting near the mic can put into the cable.
- Bass-tilt switch. It cuts the lows gently (Wikipedia's entry on the mic describes about 6 dB per octave below 400 Hz). Useful when your room or your voice is already heavy.
The element also sits relatively far behind the grille, set back, according to the mic's documented history, to keep announcers from getting too loud on it. You can work close, and the signal stays modest. That second part is what people discover after they unbox it.
RE20 vs SM7B: the numbers side by side
The SM7B is the mic every RE20 buyer also looks at, so here are both on the same grid. Prices are US list as of October 2026.
| Electro-Voice RE20 | Shure SM7B | |
|---|---|---|
| Price | $449.00 | $439.00 |
| Type | Dynamic, cardioid, Variable-D | Dynamic, cardioid |
| Frequency response | 45 Hz to 18,000 Hz | 50 Hz to 20,000 Hz |
| Sensitivity | 1.5 mV/Pa (about -56.5 dBV/Pa) | 1.12 mV/Pa (-59 dBV/Pa) |
| Impedance | 150 ohms | 150 ohms |
| Weight | 737 g | 764 g |
| Switches | Bass tilt | Bass rolloff, presence boost |
| Plosives | Internal blast filter | Foam windscreen, A7WS included |
| Mounting | Stand clamp included, 309A shock mount $139 extra | Built-in yoke mount |
| Close-up bass | Variable-D keeps it small | Normal proximity effect |
A few things the table hides:
Gain is nearly a tie. The RE20 is about 2.5 dB more sensitive than the SM7B. That is real but small. Shure says the SM7B needs a preamp with at least 60 dB of gain. Take 2.5 dB off and the RE20 lands around 57.5 dB by plain arithmetic. Both mics live in the "your cheap interface will be at full gain" class.
Proximity effect is the real fork. With the SM7B you shape your sound partly with distance: Shure suggests 1 to 6 inches, and closer means bassier. With the RE20 you shape it mostly with EQ, because distance does less. If you like using the lean-in as a tool, the SM7B gives you that tool. If you hate how your tone wanders, the RE20 takes it away.
The SM7B has more switches. Its presence boost lifts the upper mids, which some voices need to cut through. The RE20 has no presence switch, only the bass tilt, so any brightening happens in EQ.
The real price gap is the mount. The SM7B arrives ready for a boom arm. The RE20 comes with a basic stand clamp, and many desk setups add the 309A, which brings the pair to $588.00 against the SM7B's $439.00.
For the SM7B side of the story, see Is the Shure SM7B worth it for a home setup?.
What you need to plug an RE20 into a Mac
The RE20 is a passive dynamic mic with an XLR output. It needs no phantom power and no battery. It also cannot talk to a Mac directly. Here is a chain that works, with the numbers that decide whether it works well:
RE20 (1.5 mV/Pa, about -56.5 dBV/Pa)
-> XLR cable
-> [optional] inline booster: Cloudlifter CL-1 (+25 dB) or FetHead (+27 dB)
both run on the interface's 48 V phantom and do not pass it to the mic
-> audio interface with at least ~57 dB of clean gain
Scarlett Solo 4th Gen: 57 dB range (borderline, no headroom)
Scarlett 2i2 4th Gen: 69 dB range (comfortable)
Shure MVX2U Gen 2: +60 dB (adequate, needs macOS 14+)
-> USB to the Mac
How to read this:
- A 69 dB interface needs no booster. You will use roughly 57 to 60 of its 69 dB, which leaves about 10 dB in reserve for a quiet day.
- A 57 to 60 dB interface works, but with nothing to spare. You will be near the top of the knob, where many budget preamps add the most hiss. A booster moves the gain to a quieter stage and drops your interface knob back to the middle.
- Turn on phantom power only if you use a booster. The RE20 does not need it, and both the Cloudlifter and the FetHead block phantom from reaching the mic anyway.
Cloud Microphones lists the RE20 as a compatible mic for the CL-1. For a full comparison of the two boosters, see Do you need a Cloudlifter or FetHead for a dynamic mic?. If you are still picking the interface itself, Focusrite Scarlett Solo or 2i2, which one do you need for your mic? covers the gain difference that matters most here, and Do you need an audio interface for a microphone on a Mac? explains the basics.
What the setup really costs
The sticker price of the mic is about two thirds of the bill. A realistic US build, as of October 2026:
| Item | Price | Needed? |
|---|---|---|
| RE20 | $449.00 | Yes |
| 309A shock mount | $139.00 | Strongly advised on a desk boom |
| Interface with enough gain | varies | Yes |
| Cloudlifter CL-1 or FetHead | $129.00 or $79.95 | Only if your interface tops out near 57 to 60 dB |
| Boom arm | varies | Yes, rated for the weight |
The weight line is the one people skip. The RE20 is 737 g and the 309A adds 312 g, so the arm has to hold just over a kilogram at full extension without drooping. A light arm sold for USB mics may not. Do you need a boom arm for your mic, and which kind? explains what to check, and Do you need a shock mount for your microphone? covers when the 309A earns its price.
Who the RE20 is right for
- You talk for hours and move while you do it. Long-form podcasts, live shows, radio-style streams. Variable-D pays off every time you shift your weight.
- You co-host across a table. Each host turns toward the other. A mic that keeps its tone off axis keeps both voices consistent without anyone policing posture.
- You have a loud or deep voice. Low sensitivity is a feature here: the mic tolerates a big voice at close range, and the bass tilt reins in a chesty low end.
- You already own a high-gain interface. Then the RE20's main extra cost disappears.
Who should skip it
- You only need to sound good on Zoom and Teams. Call apps run their own noise suppression and compress the audio for the network, so fine differences between good microphones matter less there than in a recording. What is the best microphone for Zoom meetings? lists cheaper ways to get there.
- You speak softly and own a 50 dB interface. You will run the preamp flat out and still be quiet. Fix the gain chain first or choose a hotter mic.
- You sit still and like the lean-in. An SM7B, or a cheaper dynamic, gives you the proximity effect as a tool and costs less once the mount is counted.
- You need one cable to the Mac. The RE20 is XLR only. A hybrid USB and XLR dynamic saves the interface money.
The RE320 and RE27N/D
Electro-Voice still sells two relatives, and both answer the RE20's weak spot.
The RE320 costs $315.00 at Sweetwater as of October 2026. It also uses Variable-D, shares the RE20's hum-bucking coil, and is noticeably more sensitive at 2.5 mV/Pa (about -52 dBV/Pa), roughly 4.5 dB more output than the RE20. Its switch picks between a general curve for voice and instruments (45 Hz to 18 kHz) and a kick-drum curve (30 Hz to 18 kHz). For a podcaster on a modest interface this is the sensible member of the family.
The RE27N/D uses a neodymium magnet. Electro-Voice claims "up to 6 dB more output" and lists 2.52 mV/Pa, a range to 20,000 Hz, and three switches (two bass rolloffs and a treble cut). The RE20's documented weak spot was soft-spoken announcers, and the RE27N/D was the answer to it. Check a dealer for its current price before you plan around it.
Both fit the same 309A shock mount.
Where software fits in
An RE20 solves one specific thing at the capsule: your tone stops changing when you move. It does not touch the rest of the path. Your room still reflects, your level still differs from day to day, and on a Mac each app (Zoom, Discord, OBS, a browser) applies its own processing on top.
That gap is what TunedMic was built for, and its scope is narrow enough to state exactly. TunedMic is a Mac app that adds a virtual microphone. You keep the RE20 and the interface; TunedMic takes the interface's input, processes it on the Mac in real time with under a tenth of a second of delay, and every app that selects TunedMic as its mic gets the processed voice. Setup is a one-minute Sound Check in which you read a passage aloud while it takes more than 30 measurements of your voice, your mic and your room. The Creator family includes a profile called Broadcast, built from your own Sound Check rather than a stock preset, and manual controls for noise, room echo, clarity, loudness and a 12-band EQ are there if you want them.
What it does not do: TunedMic does not replace missing preamp gain. If your interface is maxed out and the signal is thin and hissy, raising loudness in software raises the hiss with it. Get the gain chain right first. It also will not make an RE20 sound like some other mic, and it runs only on Macs with Apple silicon (M1 or newer) and macOS 14 or later. There is no Windows version.
The other honest scenario: you came here because your voice sounds weak on calls and the RE20 was on a "best broadcast mic" list. Before spending close to $600 on a mic and mount, watch the 38-second video on the TunedMic home page. It shows how the setup works, not how an RE20 sounds: one minute of reading aloud tunes the mic you already have to your voice. If the free trial on that mic already gets you where you need to be, the RE20 is a hobby purchase, not a fix.
Your first hour with an RE20
Distance: start at 2 to 4 in (5 to 10 cm), speak into the end, not the side
Angle: straight on; Variable-D forgives drift, not speaking across the grille
Phantom power: OFF, unless a Cloudlifter or FetHead sits in the chain
Gain: set while reading at full show volume; peaks around -12 dBFS
Bass tilt: start flat; switch it on only if the voice sounds heavy in your room
Test: record 30 s, lean back 6 in for the next 30 s, compare levels
That last test tells you most of what you paid for. The level will drop when you lean back, because physics still applies, but the tone should stay recognizably the same. If it does, the mic is doing its job and the rest is gain and room. For the general level-setting method, What is gain staging, and how do you stop your mic from clipping? walks through it step by step.
The next step
Write down the maximum gain of your interface, in dB, from its spec sheet. If it is 65 dB or more, the RE20 plugs straight in and the only question left is the 309A. If it is below that, budget $79.95 to $129.00 for a booster, or look at the RE320. And if what you really want is a clearer voice on your next Zoom call, check pricing: TunedMic is $19 once, with a free seven-day trial that starts at first launch and needs no card. Payments are final, so run the trial on your own mic before you buy.