Zencastr, Riverside, SquadCast or Cleanfeed, which is best for a remote podcast?
How Zencastr, Riverside, SquadCast and Cleanfeed record a remote guest, what each costs as of October 2026, which one to pick, and the one problem none of them fixes: the guest's microphone.
Minute 38 of an interview. The guest is halfway through the story the whole episode was booked for, and her Wi-Fi drops for four seconds. On the call you hear robot noises, then silence, then her voice again mid-word. If the episode was recorded from that call, those four seconds are gone for good. If it was recorded with a remote podcast recording service that captures her audio on her own laptop, the file on her side never noticed the dropout, and the sentence is intact.
Now the second half of the same story. Her laptop sits on a kitchen table, the built-in mic is 70 cm from her mouth, and the fridge hums. The local recording captures all of that perfectly too. Every local-recording service in this comparison will hand you a flawless copy of whatever her microphone heard.
That is the whole decision in two paragraphs. Zencastr, Riverside, SquadCast and Cleanfeed solve the connection problem in different ways, at different prices. None of them solves the microphone problem. This page covers both halves: which service to record a podcast remotely with, and what to do about the sound going into it.
If you record alone, or with a guest in the same room, this is the wrong page: podcast recording software for a Mac compares GarageBand, Audacity, Descript and the rest for that case. Everything below is about guests in another city.
The short answer
Prices and limits as of October 2026. Plans change often, so check the vendor page before paying.
| Service | How it records the guest | Free option | Paid | Guest browser | Best for |
|---|---|---|---|---|---|
| Zencastr | On each person's own computer, then uploads | Yes: recording and hosting advertised as free, up to 6 participants on the plan table | Enterprise, custom price | Browser link, no guest account | Zero-budget interview shows, audio and video |
| Riverside | On each person's computer, uploads progressively during the call | 2 hours of multitrack recording once, 720p, 44.1 kHz, watermark | Pro adds 48 kHz and up to 4K; check current price | Chrome or Edge, or the Mac app | Video podcasts with non-technical guests |
| SquadCast | On each person's computer, progressive upload, 48 kHz 16-bit WAV | 1 recording hour | $16 to $50 a month billed yearly, Descript's plan names | Desktop browser | Shows already edited in Descript |
| Cleanfeed | Live high-quality link; the host's browser records what arrives | Lite: free, 2 guests, one mixed file | Pro: $12 a month, 32 guests, a track per guest | Chrome preferred; guests also Safari, Firefox | Audio-only shows, radio, a live engineer |
| Zoom (baseline) | Host's desktop app records the call | Local recording on free accounts | Not needed | Zoom app | Backup, or when the guest refuses anything new |
For a new interview show the pick is simple: start on a service that records each guest locally. The guest's internet is the one variable you cannot control or rehearse, and double-ended recording takes it out of the file. Cleanfeed earns its place when you need the live link itself to sound good, which is a different job.
How to record a podcast remotely: two mechanisms
Every remote podcast recording service does one of two things, and the marketing pages rarely say which in plain words.
Double-ended (local) recording. Each participant's browser records their own microphone to their own disk while the call runs. The call itself can be choppy; the file is not, because it never travelled over the internet during capture. Afterwards, or during the session in chunks, the files upload to the host's dashboard. Zencastr, Riverside and SquadCast work this way. So does Descript Rooms, the successor to SquadCast.
What can go wrong is specific: the upload. If a guest closes the tab before it finishes, part of the track can stay on their machine. Riverside keeps the local recording in the browser's temporary storage until it uploads, and Descript's help center warns that closing the tab too soon can stop a Rooms upload (a recovery link lets the guest finish it later). Progressive upload, sending chunks during the call, shrinks the risk but does not remove it. The rule for every guest: keep the tab open until the service says the upload is done.
Live link recording. The audio streams between participants at high quality and is recorded at the host's end. Cleanfeed works this way, and so does Zoom's own recording. The quality you record is the quality that arrived. When the connection hiccups, the hiccup is in the file. The upside: nothing to upload afterwards, no waiting for a guest's laptop, and the host hears in real time exactly what will be on the recording.
Neither mechanism is better in general. Local recording protects against a bad connection. Live recording protects against a guest who closes the laptop the moment you say goodbye.
Zencastr
Zencastr records each guest on their own machine, and it is the cheapest way to get separate local tracks. As of October 2026 its home page advertises studio-quality recording and hosting for free, with local recording, cloud backup, 4K video and 48 kHz audio. The pricing page lists 48 kHz WAV and 44 kHz MP3 recording, separate track recording, and 6 participants on the free plan, with an Enterprise tier at custom pricing for companies.
That makes Zencastr the default answer for a show with no budget that still wants the guest's audio on its own track. Two cautions. First, Zencastr now pitches hosting and video alongside recording, so a feature table in an old review is probably out of date; read the current pricing page. Second, guests join through a browser link and need no account, but they still have to stay on the page until their track finishes uploading. Tell them in the invite, not at the end of the call when they are already reaching for the trackpad.
Riverside
Riverside (now at riverside.com; the old riverside.fm address redirects) records each participant locally and uploads progressively during the session. As of October 2026 the free plan gives 2 hours of multitrack recording once, video up to 720p, 44.1 kHz audio and a watermark, plus unlimited single-track recording. Pro moves audio to 48 kHz and video up to 4K. The paid price on the pricing page was inconsistent when this was checked, so look it up yourself before you plan a budget around it.
For guests, Riverside's help center recommends Chrome or Edge. Safari can join a studio from a link, but Riverside notes stability reports in Safari and says it cannot be used for the dashboard or editor. There is also a Mac app, Riverside Studio, which needs macOS 15 Sequoia or later on Apple silicon, and Riverside recommends it on a Mac for the most stable recordings.
Riverside is the strongest choice when video matters and the guest is not technical: the guest clicks a link, the host gets per-person audio and video tracks, and the editor is in the same place. The free tier is a test drive. Two hours of multitrack is two or three episodes, and then you pay or switch.
SquadCast and Descript Rooms
SquadCast was bought by Descript in 2023, and in October 2026 it is still sold at squadcast.fm with a banner saying it has joined Descript. The plans now carry Descript's names: Free with 1 recording hour, Hobbyist at $16 a month billed yearly ($24 monthly), Creator at $24 billed yearly ($35 monthly), Business at $50 billed yearly ($65 monthly). Recordings are 48 kHz, 16-bit WAV with MP3 also available, and a session holds up to 10 people: one host and nine guests. SquadCast's progressive upload sends audio during the call.
The thing to know before you commit: Descript's help center says Descript Rooms will eventually replace SquadCast, and that no sunset date is set yet. Rooms runs in Chrome and other Chromium browsers, Safari and Firefox, and its recording time counts toward your Descript media minutes. If you edit in Descript already, record in Rooms and skip SquadCast; if you are new to both, starting on a product with an announced replacement makes little sense.
Cleanfeed, and Cleanfeed with Zoom
Cleanfeed comes from radio. It sends broadcast-grade audio between people in a browser, and the host's studio page records it. Guests do not need an account, and Cleanfeed keeps no copy of the audio on its servers: the browser saves the file to the host's computer.
As of October 2026:
- Cleanfeed Lite is free, including commercial use, for 2 guests. There is no multitrack: you get one mixed recording.
- Cleanfeed Pro is $12 a month (20% less on yearly renewal), takes up to 32 guests, and records an isolated track for each guest as WAV files, downloaded in a zip. It also adds audio repair modes, one of them called "No headphones" for a guest who has none.
On a Mac, Cleanfeed's compatibility page lists Chrome as preferred, Edge and Opera as fine, and Firefox and Safari for guests only. Its multitrack guide asks for at least 10 GB of free disk space and estimates about 1.2 GB per hour for a two-person voice session.
Cleanfeed with Zoom is a common pairing when a show wants to see faces without letting Zoom touch the sound. Cleanfeed's own guide gives the order: connect everyone in Cleanfeed first and make sure the audio is stable, then join Zoom without computer audio (use Leave Computer Audio if you joined with it, rather than just muting), untick "Automatically adjust microphone volume" in Zoom's audio settings, and turn on video last. The two recordings are separate files, so you line them up in your editor afterwards.
Cleanfeed is the right tool when the live sound is the product: radio, a producer monitoring the call, a guest dialled into a studio desk. For a weekly interview show where nobody listens live, the dropout risk of live recording is a cost you pay for nothing.
The Zoom baseline
Zoom can already record a separate file per person. In the desktop app's Recording settings, turn on "Record a separate audio file for each participant", record locally, and after the meeting the Audio Record folder holds one file per speaker. Local recording works on free accounts but not on phones.
The limit: those files are made from the audio that crossed the call, with the call's compression and its dropouts. Zoom is a fine backup and a fine plan B when a guest refuses to open anything new. It is not a remote podcast recording service in the double-ended sense.
What no remote recording service fixes
Back to the kitchen table. Local recording is a perfect copy machine, and a copy machine does not edit the original. These are the problems that survive every service above:
- Distance. A laptop mic 60 to 80 cm away records more room than voice. No upload setting changes that.
- Echo from speakers. Cleanfeed's echo guide puts it bluntly: the echo you hear is the other person's speakers. Headphones fix it. Software repair modes can remove it at the cost of quality and added delay.
- Bluetooth mics. AirPods and similar headsets have to squeeze the mic signal through Bluetooth, which limits how much detail they can send. A wired headset usually makes a better guest mic than expensive wireless earbuds.
- The guest's room. Bare walls and a hard floor will sound like bare walls and a hard floor, at 48 kHz, in WAV.
If the guest's mic is the weak link on every episode, the fix is hardware, and often cheap. The best podcast microphone for recording at home has models at several prices; mailing a regular guest a budget USB mic does more than any plan upgrade.
Prepare the guest before the session
Send this the day before, not five minutes before. Every line prevents a failure that happens on real shows.
Remote guest checklist (send the day before)
1. Laptop or desktop, not a phone. Plugged into power.
2. Browser: Chrome or Edge, updated. No private window.
3. Wired headphones on, over the ears. Speakers off.
4. Microphone: anything wired beats the laptop mic.
Distance 10 to 15 cm, slightly off to the side.
5. Pick that mic in System Settings > Sound > Input
(Mac) AND in the recording service's device menu.
6. Free disk space: 10 GB or more (20 GB for Descript Rooms).
7. Close Slack, Telegram, mail: no notification pings.
8. After goodbye: keep the tab open until upload = 100%.
9. Optional backup: QuickTime, File > New Audio Recording,
quality Maximum, running for the whole call.
Then do a 30-second test at the start of the session: record, play back the guest's local track, listen for distance, hum and echo. Thirty seconds of checking beats an hour of a track you cannot use.
Your own side of the call
The host is the only person on every episode, so your own sound is the cheapest place to make the biggest difference. Everything in the checklist applies to you too. Past that, the question is how far you want to go with processing.
Post-production cleanup in an editor works on the file afterwards. It does nothing for the live call, which is what your guest hears for an hour and what sets their sense of how professional the show is.
This is where TunedMic fits, if you host from a Mac. It adds a virtual microphone called TunedMic to the Mac. You select it as the mic in Zencastr, Riverside, Cleanfeed, Zoom or any app with a microphone menu, and that app receives your voice already processed, live. Setup is a one-minute Sound Check: you read a short passage aloud while it takes more than 30 measurements of your voice, your mic and your room, then builds your profiles from them. The Creator family (Balanced, Broadcast, Crisp) is made for podcasts and videos. It runs locally, adds less than a tenth of a second of delay, and with headphones on you can flip between your raw mic and the tuned sound before you hit record.
TunedMic's limits, plainly:
- It needs a Mac with Apple silicon (M1 or newer) and macOS 14 or later. There is no Windows version, so it does not help a guest on a PC.
- It processes your live mic, so the profile you choose is baked into the local track. Decide before the session, not in the edit.
- If a service offers its own enhancement on your track, do not stack both at full strength on the same problem.
- It does not make a weak mic sound like a specific expensive one, and it does not remove every noise.
The 38-second video on the home page runs through the setup in order: the Sound Check, the tuned voice in Zoom, Google Meet and Discord, and the Speech Report you get after a call. TunedMic has a free 7-day trial that starts at first launch, with every feature and no card; after that it is $19 once, see the pricing page. There are no refunds, so use the trial on your own mic to decide before you pay.
Set up your first remote episode
If the show is new, starting a podcast on a Mac without overspending covers the gear and publishing side. For the recording itself, do this today: open a free account on Zencastr or Riverside, invite a friend who uses a different internet provider, and record ten minutes with the checklist above. Download both tracks and listen to the friend's track alone, through headphones. If it sounds like their room rather than their voice, you have found the problem to fix before the first real guest, and it is not the service.