Sony XM4 or Bose 700, which headphones have the better mic for calls?
Sony WH-1000XM4 vs Bose 700 for calls: how many mics each one points at your voice, how they handle noise, why a Mac drops both to a narrow hands-free Bluetooth mode, and what replaced them as of October 2026.
You put on the Sony WH-1000XM4, open the MacBook, and a playlist sounds wide and full while the meeting loads. You click Join. The music in the lobby drops to a thin, boxed murmur, and thirty seconds later someone asks whether you are calling from your car. Swap in a Bose 700 and run the same test. Its microphone array was designed to strip more of the café behind you, yet your voice still reaches the other side through the same narrow channel. Both headphones are doing their job. The ceiling you hit is the same one, and it sits in the Mac's Bluetooth link, not in the earcups.
Below is the comparison itself, Sony XM4 vs Bose 700 for calls, and then the question underneath it: why either one sounds worse on a Mac than you expected, and what to do about it. If you are not attached to these two and want a headset built for calls, with a boom mic and a USB dongle, our guide to Bluetooth headsets with a good mic is the better page for you.
The short answer
- On paper, the Bose 700 is the call-oriented design. Bose built it around four microphones working as a voice array, plus a second stage that hunts down the loudest remaining noise and rejects it. In a noisy place that is the more aggressive approach.
- The Sony WH-1000XM4 is the music-first design with a decent call system. Sony counts five microphones in its Precise Voice Pickup system; the XM4 help guide labels four mics for noise canceling and a separate set for voice pickup.
- On a Mac over Bluetooth, both are capped by the same thing. The moment an app opens the headphones' mic, macOS drops to the hands-free mode, and your voice travels at 16 kHz mono at best. Neither brand can send more detail than that link carries.
- Neither is the model you would buy new for calls in October 2026. The Bose 700 is discontinued (reported by October 2024). The XM4 is being replaced by a refreshed WH-1000XM4C with the same microphone hardware.
So the honest verdict: if you take most calls in loud places, the Bose 700's array was designed for that. If you take calls at a desk on a Mac, the brand matters much less than which microphone you choose in Zoom, and the best setup uses neither headphone's mic.
What is actually inside: Sony XM4 headphones vs Bose 700
Here are the two headphones side by side, with the newer models that replaced them, as listed by the makers and major retailers as of October 2026.
| Model | Mics used for your voice | Bluetooth and codecs | Status, October 2026 | US price |
|---|---|---|---|---|
| Sony WH-1000XM4 (2020) | 5 mics in Precise Voice Pickup, partly shared with noise canceling | 5.0; SBC, AAC, LDAC; HFP and HSP for calls | Being replaced by XM4C | Launched at $349.99 in 2020 |
| Sony WH-1000XM4C (2026) | Same mic setup as XM4, no mic change announced | Not detailed in launch coverage | Preorder, fall 2026 | $299.99 |
| Bose Noise Cancelling Headphones 700 (2019) | 4 for voice: a beamforming array plus a rejection array, out of 8 total | SBC and AAC, two devices at once | Discontinued (noted October 2024) | Remaining stock only |
| Bose 700 UC | Same as Bose 700, ships with the Bose USB Link dongle | Bluetooth to the dongle, USB to the computer | Listed with "Notify me", not in stock | USB Link alone listed at $69 |
| Sony WH-1000XM5 | 4 beamforming mics plus AI noise reduction, out of 8 | On sale | Varies by retailer | |
| Sony WH-1000XM6 | 6-mic AI beamforming for calls, 12 mics for noise canceling | Current flagship | $459.99 list | |
| Bose QuietComfort Ultra Headphones (2nd Gen) | Bose lists "clear phone calls" but no mic count | 5.4; aptX Adaptive only with Snapdragon Sound sources | Current flagship | $449.00 |
Two details in that table matter more than the counts.
First, Sony's own help guide for the XM4 labels its parts plainly: two external and two internal microphones for noise canceling, and a separate set marked "voice pickup microphones" that pick up your voice on calls. The "five microphones" in the marketing is the whole team working together, not five mics pointed at your mouth.
Second, Bose's 2019 press release for the 700 describes the voice system as its own thing: six of the eight mics cancel noise, two of those team up with two more to pick up speech, a beamforming array isolates your voice, and a "rejection array" tracks and blocks the most disruptive sound left over. That second stage is the part Sony's XM4 does not describe at all. It is a design aimed at the person on the other end of the call, not at you.
Bose 700 mic quality vs XM4: what each one does with noise
The difference between the two systems shows up in the situations they were built for.
A street or a café. Here the Bose approach has the advantage on paper. A beamformer narrows its attention to the direction of your mouth; a rejection array then picks the single loudest thing still getting through, such as a grinder or the next table's conversation, and suppresses it. Sony describes the XM4's call system as five mics combined with signal processing, with no separate rejection stage. On the XM5 and XM6, Sony added AI noise reduction and dedicated beamforming mics for calls (four on the XM5, six on the XM6), so the call system is where Sony itself chose to spend the next two generations.
A quiet room at home. Here the noise processing has little to remove, and what remains is the tone of the voice itself. That is where both headphones run into the same wall, because on a Mac the tone is decided by the Bluetooth link, not by how many mics are on the earcups.
Wind and distance. Over-ear headphones put their voice mics on the earcups, next to your ears, several times farther from your mouth than a boom mic. Any beamformer works harder at that distance, and wind hitting the earcups lands right on the mics. Sony advertises a new wind-noise reduction structure for calls on the XM5, a feature the XM4 does not list.
Why your Sony or Bose headphones sound worse on a Mac
Apple documents this behavior in a support article titled "If sound quality is reduced when using Bluetooth headphones with your Mac". When an app starts using the headphones' microphone, the Mac switches the connection to a mode that carries audio both ways, and audio quality and volume drop until the mic is released. This is the Bluetooth Hands-Free Profile, the same one phones have used for decades.
Here is what that switch looks like in numbers:
Listening only (A2DP) stereo, 44.1 or 48 kHz, AAC or SBC
Mic in use (HFP, wideband) mono, 16 kHz both ways (mSBC codec)
Mic in use (HFP, fallback) mono, 8 kHz both ways (CVSD codec)
16 kHz sample rate -> sound up to 8 kHz can be carried
8 kHz sample rate -> sound up to 4 kHz can be carried
Part of a voice's crispness sits above 8 kHz: the top of the hiss in "s" and "f", the air that tells a listener you are close to the mic. At 16 kHz that region is simply not transmitted. At 8 kHz you are on a classic phone line. No beamformer can put back frequencies the link never carried. That is why the mic counts on a spec sheet decide much less on a Mac call than they seem to.
You can watch it happen. Open Audio MIDI Setup (in Applications > Utilities), select the headphones in the sidebar, and look at the Format menu while a call is running and again after you hang up. The sample rate changes with the mode. Our guide to Audio MIDI Setup covers which settings in that window matter.
To see which codec the headphones are on right now, hold Option, click the Bluetooth icon in the menu bar and hover over the headphones: the Active Codec line shows it. Whatever it says while you listen, the hands-free codecs take over the moment an app opens the headphones' mic, whichever brand is on your head.
If you have hit the same problem with Apple's own earbuds, our AirPods troubleshooting page walks through the macOS settings that decide which mic is in use.
The wired cable does not fix it
The obvious workaround is to plug in the cable that came in the box. Both cables are listening cables. Bose describes the 700's cable as a backup cable for listening. Sony owners report on Sony's community forum that the XM4's mini-jack cable carries no mic signal. Plug either one in, and the Mac will use its own built-in mic or whatever input you choose, while the headphones simply play sound.
That is not a bad outcome. It is close to the setup we recommend below.
The Bose 700 UC and the dongle question
Bose sold a business version, the 700 UC, with a pre-paired Bose USB Link module. The headphones and microphones are identical; the difference is how they reach the computer. With the dongle, the Mac sees a USB audio device instead of a Bluetooth headset, and the dongle handles the Bluetooth side with the headphones. Bose lists the module as certified for Microsoft Teams and compatible with Zoom and Google Meet, and offers its firmware updater for Mac.
As of October 2026, both the 700 UC set and the separate USB Link (listed at $69) show "Notify me" instead of a buy button on bose.com, so treat it as something to look for second-hand rather than a plan. A dongle still sends your voice over Bluetooth between the headphones and the module, and Bose does not publish what audio quality that hop carries during a call, so do not count on studio detail from it.
Dedicated office headsets with their own receivers are a different category with boom mics close to the mouth. Our comparison of headsets for work calls covers Jabra, Poly and Logitech models built that way.
The newer generations, as of October 2026
If you are shopping rather than troubleshooting, here is where the two lines stand now.
Sony WH-1000XM4C. Announced in September 2026 at $299.99 in the US and £219 in the UK. UK coverage says the refresh exists because the 2020 model does not meet EU battery rules that take effect in February 2027. Sony changed the tuning, replaced the 5-band equalizer with a 10-band one, and added a lavender color, and quoted up to 27 hours with noise canceling on, a few hours less than the XM4. Launch coverage reports the same mic hardware as the XM4. For calls, it is an XM4.
Sony WH-1000XM5. Eight mics in total, four of them beamforming mics for your voice, with an AI noise-reduction model Sony says was trained on more than 500 million voice samples.
Sony WH-1000XM6. Sony's current flagship lists a six-mic AI beamforming system for calls and twelve mics for noise canceling, at a $459.99 list price in the US.
Bose QuietComfort Ultra Headphones (2nd Gen). The successor to the line the 700 belonged to, $449.00 on bose.com, Bluetooth 5.4. Bose's product page promises "clear phone calls" but does not publish a mic count. It does accept wired digital audio over USB-C at 16-bit, 44.1 or 48 kHz. The page does not say whether the microphone works over that cable, so do not buy it on the assumption that it does.
Each new generation adds microphones and smarter noise rejection. None of them changes the Mac's hands-free Bluetooth mode. A better noise filter in front of a 16 kHz link gives you a cleaner 16 kHz voice.
The setup that works: headphones for your ears, another mic for your voice
Apple's fix in that support article is to quit the apps that use the headphones' mic. The practical version is to give those apps a different mic: the headphones stay in high-quality listening mode for the whole call, and your voice comes from a microphone that is not squeezed through hands-free Bluetooth.
- Pick the input in macOS. System Settings > Sound > Input, select MacBook Air Microphone or MacBook Pro Microphone, or a USB mic if you have one. Speak and watch the level meter move.
- Pick it again in the call app. Zoom: Settings > Audio > Microphone. Google Meet and Teams have the same choice in their audio settings. Telegram Desktop keeps its own microphone setting and ignores the system default, so check it there too.
- Leave the headphones as the output only. As long as no app uses their mic, the Mac keeps them in listening mode.
- On the XM4, turn Speak-to-Chat off before the call. It is off by default, but if you enabled it, the headphones pause or mute playback when they detect you talking. With the call coming through as ordinary audio, that means the meeting goes quiet each time you speak. Switch it off in the Sony phone app (Sony | Sound Connect, formerly Headphones Connect) or by holding two fingers on the touch panel until the voice prompt says it is deactivated.
- Consider ambient mode. With noise canceling fully on, your own voice sounds muffled to you, and you may end up talking louder to compensate. Sony's Ambient Sound Mode, on the CUSTOM button, lets some of your voice back in. If hearing yourself is the problem, our page on hearing yourself while you talk covers the options.
- Try Voice Isolation. In apps that support it, macOS offers Mic Mode from the menu bar while a call is running, with Voice Isolation as one choice. It cuts background noise from the built-in mic. It does not change the mic's distance from your mouth or the room's echo.
The trade-off is real. A MacBook mic sits on the laptop, an arm's length away, so it hears more of the room than an earcup mic does. In a quiet room that matters less than the 8 kHz frequency ceiling of hands-free Bluetooth. In a noisy open office the headphone array may still win. Test both: record thirty seconds through each in QuickTime Player and listen back on the same headphones. Our guide to testing your mic shows how to hear what the other side hears.
Where TunedMic fits
The setup above leaves one weak link: the MacBook's built-in mic, which picks up the room and was never tuned for your particular voice. That is the gap TunedMic was made for. It adds a virtual microphone called TunedMic to the Mac; you select it in Zoom, Meet, Teams, Telegram or any other app instead of the raw mic. Behind it sits your real mic, the built-in one, a USB mic or a headset, and TunedMic processes it on the Mac in real time.
Setup is a one-minute Sound Check: you read a short passage aloud, and TunedMic takes more than 30 measurements of your voice, your mic and your room, then builds its profiles from those. With your Sony or Bose headphones on as the output, you can flip between the raw mic and the tuned sound live, on your own voice, before a call. It adds less than a tenth of a second of delay, and the voice never leaves the Mac.
Three limits, stated plainly:
- It needs a Mac with Apple silicon (M1 or newer) and macOS 14 or later. There is no Windows or Intel version.
- It can also process the headphones' own mic, but it cannot restore what Bluetooth never transmitted. A wired or USB mic, or the Mac's built-in one, gives it more to work with.
- It does not make a laptop mic into a studio mic, and it does not remove every sound in the room.
The 38-second video on the home page shows the whole setup: a minute of reading aloud that tunes the mic to your voice. The free 7-day trial on your own mic is the fastest way to judge whether the change is worth it for you.
Which one should you use: a quick decision table
| Your situation | What to do |
|---|---|
| You own a Bose 700 and take calls on the move | Use its mic; it was built for noisy places |
| You own an XM4 and take calls on the move | Use its mic, turn Speak-to-Chat off; it has no separate rejection stage like the Bose |
| You take calls at a desk on a Mac, either model | Headphones as output, built-in or USB mic as input |
| Buying new mainly for calls | Look at a headset with a boom mic, or at the XM6 / QC Ultra knowing the Mac link limit stays |
| You use Windows | Windows uses the same hands-free Bluetooth mode for most headphones; TunedMic is Mac-only |
What to do before your next call
Five minutes is enough. Put on your Sony or Bose headphones, open Audio MIDI Setup, start a test call in Zoom and watch the headphones' sample rate drop. Then switch Zoom's microphone to the MacBook's built-in mic, record thirty seconds both ways in QuickTime Player, and compare them on the same headphones. If the built-in mic wins on tone but loses on room noise, try TunedMic on it: the seven-day trial includes every feature and needs no card or account. After it, TunedMic is $19 once, and payments are final, so use those seven days on real calls.