Behringer UM2, UMC22 or UMC202HD, which cheap interface is enough for one mic?
UM2 and UMC22 are nearly the same 16-bit box, the UMC202HD adds 24-bit and a second preamp, the UMC404HD adds inputs, not sound. Prices, gain limits, Mac setup and the left-channel fix.
The cheapest Behringer box costs about as much as a decent XLR cable. As of October 2026, Musician's Friend lists the U-PHORIA UM2 at $43.90, the UMC22 at $52.90, the UMC202HD at $86.90 and the UMC404HD at $139. For a Mac with one microphone on it, three of those four will do the job. The question is which three, and what each extra $10 or $40 changes in the signal that reaches Zoom, Telegram or OBS.
The short version: the UM2 and the UMC22 are nearly the same device, the UMC202HD is the one to buy if your mic is a dynamic or you want 24-bit recording, and the UMC404HD is for people who need four inputs, not better sound from one. The rest of this page explains why, and where all four stop helping.
If you are still deciding whether your microphone needs an interface at all (a USB mic does not), read do you need an audio interface for a microphone on a Mac first. This article assumes you already own an XLR mic, or are about to buy one, and want the cheapest box that will not hold it back.
The four models side by side
Behringer prints very few numbers on its product pages. Here is what the vendor pages and the Thomann spec sheets do confirm, with US prices from Musician's Friend as of October 2026.
| UM2 | UMC22 | UMC202HD | UMC404HD | |
|---|---|---|---|---|
| US price, Oct 2026 | $43.90 | $52.90 | $86.90 | $139.00 |
| Mic inputs | 1 | 1 | 2 | 4 |
| Preamp, per Behringer | XENYX | Midas-designed | Midas-designed | Midas-designed |
| Resolution | 16-bit / 48 kHz | 16-bit / 48 kHz | 24-bit / 192 kHz | 24-bit / 192 kHz |
| Phantom power (+48 V) | yes | yes | yes, one switch for both | yes |
| Pad per input | no | no | yes, 20 dB | not listed on the page |
| Power | USB bus | USB bus | USB bus | separate power supply |
| Computer port | USB-B | USB-B | USB-B | USB-B |
| On sale since (Thomann) | Dec 2013 | Dec 2013 | Feb 2016 | Apr 2015 |
Two things in that table matter more than the rest. The first is the resolution row: the two cheap boxes record at 16-bit, the HD models at 24-bit. The second is the row that is missing. None of the four Behringer pages publishes a gain range, the one number that tells you whether a quiet microphone will reach a usable level. Focusrite, by comparison, prints 57 dB for the Scarlett Solo. Gain gets its own section below, because that is where cheap interfaces really differ.
Behringer UM2 vs UMC22: same box, different label
Put a UM2 and a UMC22 next to each other and the feature list barely changes. Both have one combo XLR/jack input for the microphone, one extra jack for a guitar, a +48 V switch on the back, a Direct Monitor switch, a signal and clip LED, a headphone output, and power from the USB cable. Both have been on sale since December 2013 and both run at 16-bit, 48 kHz.
The visible difference is the preamp name. Behringer calls the UM2 preamp XENYX and the UMC22 preamp "Midas-designed". Behringer publishes no gain or noise figures for either version, so the marketing name is not something you can turn into a measurable promise. The UM2 page does claim 100 dB of dynamic range for its XENYX preamp. Treat that as vendor copy.
The practical differences are small. The UM2 has RCA line outputs on the back, which suit old hi-fi speakers; the UMC22 has two 1/4" TRS outputs, which suit studio monitors. For headphones on a call, neither changes anything. For $9 more the UMC22 gets the newer preamp branding. If the price gap in your country is still around $9, take the UMC22. If the UM2 is the one in stock today, it is not a mistake.
Is 16-bit enough for calls?
Yes. A 16-bit converter has a theoretical dynamic range of about 96 dB (6.02 dB per bit). Video call apps squeeze your voice through a codec long before that limit shows up, and a voice in a normal room never uses that whole range anyway. Where 16-bit starts to pinch is recording: if you set the gain low to stay safe and then raise the level in an editor, you raise the converter's own floor with it. At 24-bit that margin is much larger. If calls are the job, ignore this. If you record a podcast or voice work, it is one reason to move up to the UMC202HD. The sample rate and bit depth guide goes through the numbers in more detail.
What the UMC202HD buys you for $34 more
Of the four, the Behringer U-PHORIA UMC202HD covers the most ground for one microphone, and the reasons are concrete:
- 24-bit / 192 kHz converters. More headroom when recording, as above. For calls, 48 kHz is all you need; the higher rates only grow the file.
- Two preamp channels. A second mic for a guest, or mic plus guitar. Each input has its own gain knob and a 20 dB pad for loud sources.
- Direct Monitor switch plus a mix knob. You can blend your own voice (with no delay) against the computer's playback in the headphones. The UM2 and UMC22 have a switch, but no blend.
- Same small, USB-powered metal box, no wall adapter.
Behringer publishes no measurements for the UMC202HD either, so a review is the next best source. A February 2026 review at HigherHz reports gain of around 51 dB and equivalent input noise of roughly -129 dB, and quotes Behringer's own figure of 110 dB (A-weighted) dynamic range while noting that this number may vary from one unit to the next. The same review describes an all-metal chassis with plastic knobs. Those are one reviewer's numbers on one unit, and they are still more than the product page gives you.
One quirk: the +48 V switch on the UMC202HD powers both inputs at once, so you cannot have phantom on one channel and off on the other. For a condenser plus a dynamic mic that is fine, since a dynamic mic ignores phantom power.
When the UMC404HD makes sense (and when it is overkill)
The UMC404HD is four of the UMC202HD's preamp channels in a wider box, plus four insert jacks for outboard gear like a hardware compressor, MIDI in and out, and outputs on jack, RCA and XLR. Unlike the smaller three, it is not powered over USB: Thomann lists it as not bus-powered, with a power supply in the box.
For a single microphone, none of that improves the voice. You pay $52 more than the UMC202HD for three inputs you will not use and a wall adapter on your desk. It earns its price in three situations:
- You record two or three people around one table.
- You own a hardware compressor or EQ and want to put it between the preamp and the converter through the inserts.
- You also play a MIDI keyboard and want one box for everything.
If none of these is you, the UMC404HD is the wrong answer to a one-mic question. Its sibling, the UMC204HD ($97.98), adds outputs rather than inputs and is equally unnecessary for calls.
Gain: the number Behringer does not print
This is where the cheapest interfaces really split. A preamp has to lift a microphone's tiny signal to a level the converter can use. Condenser mics put out a lot, dynamic mics put out much less, and a few dynamics are famously hungry. Shure says its SM7B "likes around +60dB of clean gain".
Set that next to the roughly 51 dB HigherHz measured on the UMC202HD, and you see the problem: with an SM7B the knob ends up near its maximum and the level is still low, and the top of the knob is where any preamp's own hiss gets amplified the most. The UM2 and UMC22 publish no gain figure at all.
| Your mic | Phantom power | UM2 / UMC22 | UMC202HD |
|---|---|---|---|
| XLR condenser (AT2020 type) | needs +48 V | fine | fine |
| Average dynamic (SM58, Q2U on XLR) | not needed | works, gain fairly high | comfortable |
| Low-output dynamic (SM7B type) | not needed | not recommended | add an inline booster |
The inline booster is a small phantom-powered box between mic and interface. The Cloudlifter and FetHead guide explains when it is worth buying. If you are buying an SM7B with a $53 interface, budget for one, or look at an interface with a higher published gain. The comparison of small one-mic interfaces covers MOTU, Audient, SSL and PreSonus models that print their numbers.
To set the level on any of these four: speak at your normal call volume, at your normal distance, and turn the gain up until the signal LED is lit steadily on loud words and the clip LED never flashes. Then leave it. The gain staging article has the full routine.
Do Behringer interfaces need drivers on a Mac?
No. The download pages for the UMC models list drivers for Windows only, and Sweetwater's setup guide says a driver isn't necessary on a Mac because Behringer interfaces are class compliant. macOS already has the USB audio driver they use, so on a Mac you plug in and the box appears in the input list. The Windows driver stays on the Windows side of the download page.
What you do need on a recent Mac is the right cable. All four models have a square USB-B port, and Thomann lists a USB-A to USB-B cable in the box for the UM2 and UMC202HD. A MacBook Air has only USB-C ports (two Thunderbolt 4), so you need a USB-C to USB-B cable or a small adapter. Buy it with the interface, not after.
The full setup, in order:
1. Mic into input 1 (the left combo socket). Gain at zero.
2. +48 V on only if the mic is a condenser.
3. USB-C to USB-B cable into the Mac.
4. Apple menu > System Settings > Sound > Input: select the interface.
(A UMC22 can show up as "USB Audio CODEC", not "Behringer".)
5. Audio MIDI Setup > select the device > Format: 48,000 Hz.
(16-bit on UM2/UMC22, 24-bit on UMC202HD/UMC404HD)
6. Speak at call volume, raise gain until loud words light the
signal LED and the clip LED stays dark.
7. In Zoom, Telegram, Discord or OBS: pick the same device as microphone.
Step 5 is where Apple's Audio MIDI Setup comes in: select the device, then use the Format pop-up to set sample rate and bit depth. 48 kHz matches what call apps and video work expect and avoids a resample.
The left-channel problem
Here is the issue that sends people to forums. Every model in this lineup is a two-channel device as far as the Mac is concerned, even the one-mic UM2. Your microphone arrives on channel 1, which some apps treat as the left side of a stereo pair. One UM2 owner on the vMix forum put it simply: "By default it only records on the left side."
Most call apps take the first channel and you never notice. Recording and streaming apps are where it shows up as a voice in one ear:
- OBS: open Advanced Audio Properties for the mic source and tick Mono. Some users report the level dropping a little after that, because the two channels are averaged; nudge the gain up if so.
- GarageBand, Logic, Audacity: create a mono track and set its input to input 1.
- Plug the mic into input 1, not 2, on the UMC202HD. Some apps look only at the first input, or the first two.
This is not a fault in the hardware. It is how a multichannel interface presents itself, and the same thing happens with Focusrite boxes.
Behringer UMC22 vs Focusrite Scarlett Solo
This comparison gets searched a lot, so here are the numbers. As of October 2026 the Scarlett Solo 4th Gen lists at $169.99 on Focusrite's site, with 57 dB of published gain range, 24-bit / 192 kHz converters, a USB-C port and an Air mode that adds a presence lift. The UMC22 costs $52.90, records at 16-bit / 48 kHz, connects with USB-B and publishes no gain figure.
What the extra $117 buys is mainly certainty: a known gain range, 24-bit recording, a cable that matches a modern Mac, and a vendor that documents its products in detail. What it does not buy is a different-sounding voice on a Zoom call with a condenser mic at a normal distance; the call codec is the narrower pipe there. If your mic is an SM7B-type dynamic, both are short on gain. If you are torn between the Solo and its two-input sibling, see Scarlett Solo or 2i2.
What none of these interfaces does
A preamp makes the signal loud and clean. It does not know about the fan in your laptop, the echo off a bare wall, or why your voice sounds thin through this particular mic. Behringer's pages for these four models list no onboard processing and no loopback, so whatever the room adds to your voice goes straight to the call.
The free fixes come first:
- Move the mic closer. Halving the distance cuts room echo and noise relative to your voice more than any gain knob.
- Use the noise suppression built into your app. Zoom, Teams and Discord each have their own; see the Zoom audio settings and Discord noise suppression guides.
- For streaming, OBS filters (noise suppression, compressor, gain) on the mic source do a lot. The order matters, and the OBS mic filters guide lays it out.
The catch with app-level fixes is that each app has its own, and they do not carry over. Your voice can sound fine in OBS and flat in Telegram on the same day.
This is the gap TunedMic is built for, on a Mac. It adds a virtual microphone called TunedMic, takes the signal from your real input (here, the Behringer interface), processes it on the Mac and hands every app the processed voice. Setup is a one-minute Sound Check: you read a short passage while it measures your voice, mic and room, and it builds nine profiles from that measurement. You pick TunedMic as the mic in Zoom, Telegram, Discord or OBS, and switching a profile changes the sound everywhere at once. It adds less than a tenth of a second of delay and the voice never leaves the Mac.
The limits are real. TunedMic needs a Mac with Apple silicon (M1 or newer) and macOS 14 or later; there is no Windows or Intel version. It works with what the preamp gives it, so get the gain right first: no software can recover a signal that clipped on the way in. And it does not turn a $44 interface into a different microphone.
The 38-second video on the home page shows the whole setup (one minute of reading aloud) and the Speech Report you get after a call. To judge the processing on your own Behringer before spending anything, there is a free 7-day trial with every feature and no card; after that it is $19 once, with no refunds.
Which one to order
- Calls only, condenser or average dynamic mic, tight budget: UMC22. The UM2 if it is cheaper where you buy.
- Podcast or voice recording, or a dynamic mic: UMC202HD, for 24-bit and the extra gain headroom.
- SM7B or another low-output dynamic: UMC202HD plus an inline booster, or a different interface with 60 dB of published gain.
- Two to four people, outboard gear, MIDI: UMC404HD, and keep a spot free for its power supply.
Before you check out, add a USB-C to USB-B cable to the cart if your Mac has only USB-C ports. When the box arrives, run the seven steps above, make a 30-second test recording, and listen back in headphones. If the voice is clean but still not what you want on calls, try TunedMic on that interface during the free trial and check the price.