How do you set up Audacity on a Mac to record your voice?

A silent first take in Audacity for Mac comes from one of three places: macOS permission, the input device, or the level. Fix all three, then set sample rate, podcast settings and export.


You install Audacity, plug in a USB mic, press the red button and talk for half a minute. The playhead moves. The track stays a flat line. Nothing is broken: on a Mac a silent first recording almost always comes down to one of three things, and they sit in three different places. macOS has to let Audacity use the microphone. Audacity has to be pointed at the right input. And the input level has to be high enough for the meter to move.

This guide walks through all three in the order you will meet them, then covers the settings that decide how the take sounds: sample rate, channels, level, the first test, a podcast-style effect chain and export. Menu names below are from Audacity 4, the current version as of October 2026. If you still run Audacity 3, most of the logic carries over, but some buttons sit elsewhere.

Which Audacity for Mac to download

Get it from the official page, audacityteam.org/download/mac. Audacity is free and open source, and the current version there is 4.0.1. The page offers three disk images, and the choice is less obvious than it looks:

BuildRuns onThe catch
Universal DMGIntel and Apple siliconThe safe default
ARM64 DMGApple silicon only (M1 and newer)The download page marks it "No plugin support"
x86_64 DMGIntel MacsFor macOS 10.14 and earlier, which cannot run the Universal image

If you plan to add third-party plugins later (an extra EQ, a de-esser), the ARM64 build is the wrong pick even on an M-series Mac. Take the Universal one. The Audacity team says the app is tested on macOS 14 and 15 and may work on releases back to 10.11 El Capitan.

Installation is the usual Mac routine: open the .dmg, drag Audacity into Applications, launch it from there. macOS warns that the app was downloaded from the internet; choose Open. On the very first launch Audacity 4 asks you to pick an app theme, a clip theme and a workspace. If you are following an older Audacity 3 tutorial, choose Classic for both the clip theme and the workspace and the layout stays closest to what those tutorials show.

If all you need is a quick voice memo and not an editor, Audacity is more tool than the job requires. The guide to recording audio on a Mac compares QuickTime, Voice Memos and GarageBand for that reader; this page is for people who want Audacity specifically.

Step 1: give Audacity access to the microphone

macOS treats the microphone as private hardware. The first time Audacity starts recording, a prompt asks whether to allow it. If you clicked Don't Allow, or the prompt never showed, Audacity records silence, and nothing inside Audacity tells you why.

The fix lives in macOS, not in Audacity:

  1. Apple menu > System Settings.
  2. Privacy & Security in the sidebar (you may need to scroll).
  3. Microphone.
  4. Turn Audacity on in the list.
  5. Quit Audacity completely (Cmd+Q) and open it again.

Two details catch people here. The Audacity manual points out that although macOS calls this switch "Microphone", it covers every recording device, including USB and Thunderbolt audio interfaces. So a perfectly working Focusrite or USB mic will still record silence if this switch is off. And macOS updates sometimes reset the permission: the same manual page lists error -9999 ("unanticipated host error") as typically caused by a lost USB connection or a microphone permission change after an update. If Audacity worked last week and records nothing today, check this switch before anything else.

If the mic is silent in every app, not only Audacity, the problem is upstream of Audacity, and the Mac microphone troubleshooting guide is the faster route.

Step 2: pick the input in Audio setup

Audacity 4 has an Audio setup button in the middle of the top bar. Click it and you get three choices that matter:

  • Recording device: your mic or interface by name. A MacBook's built-in mic shows up here too, and so does any virtual mic installed on the Mac.
  • Playback device: your headphones. If playback is silent, this is the first thing to check.
  • Recording channels: set 1 (Mono) for a voice.

Mono deserves a sentence of defense. One mic captures one voice. A stereo track stores that one signal twice and doubles the file size for nothing. Stereo is for music recorded with two mics or files that are already stereo.

If your mic is not in the list, plug it in and choose Rescan audio devices at the bottom of the menu. You do not need to restart Audacity.

A note on Bluetooth: AirPods and other Bluetooth headsets do appear as recording devices, but Bluetooth limits how much detail a mic can send. For anything you plan to publish, a wired headset, a USB mic or even the MacBook's built-in mic usually gives Audacity more to work with.

Step 3: sample rate, and why 44.1 vs 48 kHz rarely matters for voice

The project sample rate lives in Preferences. On a Mac that is the Audacity menu > Preferences > Audio settings, the page that also holds the audio API, devices, buffer size and meter range.

Audacity has long defaulted to 44,100 Hz. Pick by destination, not by ambition:

  • 44,100 Hz for podcasts and audio-only files. Apple Podcasts accepts 44.1 or 48 kHz.
  • 48,000 Hz if the voice will sit under video, since video work is usually built around 48 kHz.
  • Higher rates add file size and nothing a listener can hear on speech.

The rate in Audacity should match what macOS uses for the same device. Open Audio MIDI Setup (Applications > Utilities), select the mic and check its Format. The Audacity manual names a mismatch there as one of the causes of recording errors. For the full argument on rates and bit depth, including why 24-bit gives you headroom and 16-bit is fine for delivery, read which sample rate and bit depth to use for voice.

Step 4: set the level before you record

Click the microphone button in the toolbar. The Microphone level flyout opens with a live meter; Audacity shows it even when you are not recording, because "Show mic metering when not recording" is on by default.

Talk the way you will talk in the real take, at the same distance, and watch the peaks. The Audacity manual's target is plain:

Normal speech peaks:   -18 dB to -6 dB
Hard ceiling:          below 0 dB (clipping cannot be repaired)
Meter barely moves:    raise the level or move closer to the mic

Two things the manual says that most tutorials skip. First, this slider changes the system input level, so moving it also changes how loud you are on Zoom or in any other app that uses the same mic. Second, a quiet take boosted later with Amplify brings the room noise up with it. A good level at the source beats any fix afterward.

Distance does more than the slider. Sound level drops by about 6 dB each time you double the distance to the mic, so moving from about 12 inches to 6 (30 to 15 cm) gains your voice roughly 6 dB, the same as a big slider move, except the room noise stays where it was.

If you want to hear yourself while recording, put on headphones at low volume and tick Turn on input monitoring in the same flyout. Never monitor through speakers: the mic picks up its own output and feeds back.

One macOS detail: if Control Center shows a Mic Mode control while Audacity records, Apple's advice for creative recording is to set it to Standard. Voice Isolation and Wide Spectrum change the sound of the input, which is fine on a call and confusing when you are judging a recording.

Step 5: a ten-second test take

Before recording anything that matters, do this once:

  1. Click Add track at the top of the track area and choose Mono.
  2. Click the new track's header so it is selected; recording goes there.
  3. Turn on View > Show clipping in waveform, which marks clipped samples in red.
  4. Press R (or the red Record button), stay silent for five seconds, then read two sentences.
  5. Press Space to stop, and Space again to play it back.

The silent seconds at the start are not wasted. They are your room tone: the sample Noise Reduction needs later, and an honest measure of how loud the room is. If the flat part of the waveform is visibly thick, there is a fan, a fridge or a hum to deal with before you blame the mic.

Listen on headphones, not laptop speakers. Small speakers barely reproduce low frequencies, so a 50 or 60 Hz hum that anyone on headphones will hear can vanish on them.

Audacity podcast settings: a chain that holds up

Once the raw take is clean and well leveled, the processing is short. This is a sensible starting chain for spoken word, in this order, using effects from the Audacity 4 Effect menu:

StepEffect (menu)Setting to start withWhy
1EQ and filters > High-pass Filter80 Hz, 12 dB per octaveThe manual suggests 60 to 100 Hz for voice; the default is 1000 Hz, which would thin a voice badly
2Noise removal and repair > Noise ReductionProfile from your room tone, gentle amountOnly if steady hiss or hum is audible
3Volume and compression > CompressorDefaults: threshold -12 dB, ratio 4, make-up 9 dBEvens out loud and quiet words
4Volume and compression > Loudness NormalisationPerceived loudness, -16 LUFSApple Podcasts asks for about -16 LKFS, plus or minus 1 dB
5Volume and compression > LimiterOutput -1 dBApple asks that true peak stay at or below -1 dB FS

A few honest caveats. The Loudness Normalisation dialog defaults to -23 LUFS, the EBU R 128 broadcast target, so change it if you publish a podcast. The compressor defaults are a reasonable start, not a recipe: if breaths start jumping out between sentences, lower the ratio. And skip Noise Reduction when the room tone is already quiet, because every pass of it trades a little of the voice for the noise it removes. The step-by-step for that effect, including what it cannot remove, is in how to remove background noise from a voice recording.

In Europe and Russia, electrical hum sits at 50 Hz and its multiples; in the US and Canada, at 60 Hz. If you hear a steady low drone, a Notch Filter at that frequency, applied before Noise Reduction, often does the job more cleanly.

Audacity 4 also has realtime effects: click Effects on the track header (or press E), then Add effect. These are calculated during playback and do not touch your recording until you export, which makes them handy for trying a compressor setting on and off before committing. The Effect menu versions rewrite the audio.

Export: WAV to keep, MP3 to send

File > Export audio opens the export dialog. Choose "Export full project audio", a format, mono or stereo, and the sample rate.

  • Keep a WAV (or FLAC) of the finished episode as your master.
  • For upload, MP3 at 128 kbps mono is what the Audacity manual suggests for speech, and it sits inside Apple's recommended 96 to 128 kbps for mono MP3.
  • Export a mono recording as mono. Stereo only doubles the file with two identical channels.
  • M4A appears only after FFmpeg is installed.

Save the project too (.aup4 in Audacity 4) if you might edit again. The export is a flat file; the project keeps your tracks and effects editable.

When something still goes wrong

What you seeMost likely causeFix
Flat line, meter deadMicrophone permission offSystem Settings > Privacy & Security > Microphone, then restart Audacity
Error -9999USB dropped, or permission reset by a macOS updateReconnect, rescan devices, recheck permission
Mic missing from the listPlugged in after launchAudio setup > Rescan audio devices
You hear yourself echoingInput monitoring through speakers, or monitoring in two appsHeadphones, or turn monitoring off
Crackles and dropoutsBuffer too small, or a slow external driveRaise buffer size in Audio settings; record to the internal SSD
Quiet on Zoom after recordingThe Audacity level slider changed the system input levelReset Input volume in System Settings > Sound

That last row surprises people. Since the slider in Audacity is the macOS input level, a session in Audacity can leave your next call quieter or louder than expected. The guide to Mac microphone settings covers where that level lives in System Settings.

Fix it after recording, or before

Everything above follows one pattern: record raw, then repair. For an occasional voice-over or a weekly podcast where you sit at the same desk, that workflow is fine: it costs nothing and needs nothing beyond Audacity.

It gets tedious in two situations. The first is volume: if you record several takes a day, re-running a noise profile and a compressor on each one adds up. The second is that the same mic also goes on calls, and nothing you set up in Audacity follows you into Zoom, Google Meet or Discord. Each app runs its own processing, or none.

That gap is what TunedMic is built for. It adds a virtual microphone called TunedMic to the Mac. Your real mic stays as it is; TunedMic takes its sound, processes it on the Mac in real time, and any app that lets you choose a mic can pick it, Audacity included. So in Audio setup you select TunedMic as the Recording device, and the take arrives already adjusted for noise, room echo, clarity and loudness, with the same voice on your next call.

The setup is a one-minute Sound Check: you read a short passage while it takes more than 30 measurements of your voice, mic and room, and builds nine profiles from them (Narrator, Creator and Vocal families). The Creator family is the one aimed at streams, videos and podcasts. It adds less than a tenth of a second of delay, runs locally, and the voice is never uploaded.

The limits are concrete. TunedMic needs a Mac with Apple silicon (M1 or newer) and macOS 14 or later; there is no Intel or Windows version. If you record through it, go easy on Noise Reduction in Audacity afterwards, since the noise has already been handled once. And it does not turn a bad mic into a studio one; it processes whatever your mic sends it.

There is a free seven-day trial with every feature, starting at first launch and needing no card or account. After that it is $19 once, and payments are final, with no refunds. Before deciding, the 38-second video on the home page shows what the one-minute Sound Check asks of you and what the Speech Report shows after a call; the trial then tells you how your own mic sounds through TunedMic. Pricing details are on /pricing.

Your next ten minutes

Open System Settings > Privacy & Security > Microphone and confirm Audacity is on. Launch Audacity, set Audio setup to your mic and 1 (Mono), and adjust the Microphone level until normal speech peaks between -18 and -6 dB. Then record ten seconds: five of silence, five of you reading. If the silent part is a thin line and the speech stays out of the red, you are ready to record the real thing.

Keep reading